Split Charge Relay Kit Starter Battery Charger to Leisure Battery For Camper Van

  

Split Charge Relay Kit Starter Battery Charger to Leisure Battery For Camper Van. 5M High Integrity Digital Voltmeter Display Voltage Sensitive Split Charge Relay Kits with 6way fuse box & battery isolator switch - 12v 140A VSR. Application: Camper Vans, Motor homes, 4x4s, Day Vans, Mobile workshops, Cars or Boats. Charging for Leisure Battery up to 220AH.

Digital Voltmeter Display Voltage sense systems are especially suited for modern vehicles with canbus controlled wiring as this type of kit does not need an ignition feed or any additional wiring and are very simple kit to install, all you need to do is to connect your starter battery to your leisure battery(s) by using the kit supplied, with very easy to understand fitting instructions and a wiring diagram. The voltage sense relay simply detects the rise in voltage from you vehicles charging system to allow you to charge your leisure battery(s) while your engine is running. When your engine is switched off, the relay will isolate your leisure battery(s) from your main starter battery. So it does not drain your main starter battery and you will always be able to start your vehicle. This advanced kit comes with a 12v 6 way fuse box and two battery isolators enabling you to isolate either the starter battery of your vehicle, or the 12V power to the fuse box (or both if your van will be parked up out of use for long periods).

Digital Voltmeter Display Voltage Sensitive Relay compare to old version VSR without Digital Voltmeter Display. Digital Voltmeter Display for sensing battery voltage. Emergency Switch button for auto or manual charging mode. Hardware inside VSR fully upgraded with more reliable and higher quality components.

Package Includes: (You will be supplied with everything you need to fit this kit). 12v 140amp Digital Voltmeter Display Intelligent Voltage sense Relay. 6way Fuse Box with 12 fuse blades & Label Stickers. 2x 200A Battery Isolator Switch with two keys. 1 Pair 8mm Post Type Battery Terminals.

2 x MTA Midi Fuse holders. 4 x 60A MTA Midi Fuses including 2 spares.

10 x Cable Crimps Terminals Connectors. Heat shrink to protect all the connections. 10 x adhesive cable tie fixings base to keep everything tidy. Easy to understand Fitting Instructions + after sales support if required. We appreciate your business and strived to improve our customer service and our commitment to quality.