Shentec 12V 100Ah Lithium Iron Phosphate LiFePO4 Battery BMS For Leisure RV Boat

  
Voltage 12.8V Cell type LiFePO4 Capacity 100Ah Discharge temperature -20°C -60°C Total energy 1280Wh Charging temperature 0°C -55°C Max. Shentec 12V 100Ah Lithium Iron Phosphate LiFePO4 Battery BMS For Leisure RV Boat. Shentec 12.8V 100AH LiFePO4 Battery Description. Lithium iron phosphate battery is recycled more than 5000 times, which is more than eight times that of lead-acid batteries (300-400 times).

The service life can reach 10 years under ideal conditions. The weight of lithium battery is 1/3 that of lead-acid battery.

It is easy to carry and install. The attribute of "harmless and clean energy for the environment" definitely makes it an ideal replacement for most of the conventional ones Lead-Acid Cycle Batteries. Our BMS is a multi-channel battery monitoring and balancing system for LiFePO4 battery packs.

Battery has built-in BMS (battery management system), low self-discharge, can prevent overcharge, over-discharge, over-current, overload, short circuit. The LiFePo4 lithium battery is safe, efficient and portable, suitable for RV, caravan, electric boat, golf cart, children's vehicle, tool trailer, solar panel, or can be used as backup power. [Caution]This battery is not suitable for motorcycles or starter batteries.

Shentec 12.8V 100Ah LiFePO4 Battery Specifications. Compatible Battery Type: LiFePO4 Battery Over 40Ah. DC Specification: Red:Positive, Black:Negative.

The battery management system monitors and controls each unit of the battery to ensure the battery shut down in the event of under voltage or overload, and restarts automaticlly once the problem isresolved to avoid damaging the battery. Lmportant functions ofthe battery managementsystem. When over charging occurs, the BMS will turn off the battery out put to protec the battery.

Eachcell in the battery individuall monitors the battery discharge. If this tums off the battery output, the only way to tum the battery backon is to charge it. Note: Even small consumer such as alam systems, relays, backup systems et. Consume capacty and drain the battery.

If you don't use the battery for along time, please disconnect all connections between the battery and the system. The total charging voltage of the LifePO4 battery is14.6Vthe charging voltage of a single cell must not exceed 3.65V/cell, otherwise, the battery will be damaged by overvoltage. Therefore, it is best to use a suitable charger with a final charging voltage of 14.4V to 14.6V to charge the LiFePO4 battery. Athough BMS can protec the battery from overcharging, it needs to absorb and burn electicity by itself.

If the charging voltage exceeds14.6V for a long time, it wil damage the BMS! The buili-inactive balancer can adjust the battery at any time to ensure the intemal small batteries(cells) have the same voltage and prolong battry life. BMS always monitors and control all parameters for reliable and safe charging.

If something goes wrong you can prevent charging by tuming off the battery output to protect the battery. When the battery temperature is too high/low, the BMS will turn off the battery. At this time, you need to wait for the temperature to retun to normal first, and then BMS will enable the output again.

Can this battery be charged with a lead-acid battery charger? We recommend our customers to use a professional LiFePO4 charger for charging.

A lead-acid charger cannot fully charge a LiFePO4 battery. Can these LiFePO4 batteries be connected in parallel or in series? Theoretically yes, but you must ensure that the batteries are fully charged and all have the same voltage level before using them in series or parallel. We do not recommend mixing series and parallel. What should I do if the battery is not charged and cannot be used? Our battery BMS has several protection functions to ensure safety: short circuit protection, overcurrent protection, overload protection, overvoltage protection, overcharge protection and overdischarge protection. Once a protection has been triggered, the battery is temporarily unusable. If the depth of LiFePO4 discharge is too large, it may cause harm and danger. Please install safety relays or circuit breakers to prevent the silent loads from being deeply discharged.

When the lithium battery is damaged or overcharged, the lithium battery emits harmful gases such as phosphate. The temperature range in which the battery can be charged is between 0? Charging the battery attemperatures outside of thisrange can severely damage the battery or shorten the life of the battery. The battery can discharge a temperature range from -20?

Discharging the battery at a temperature outside of this range canseverely damage the battery or shorten the battery life. International Buyers - Please Note. We understand that sometimes an item may not turn out to be just what you need. DO NOT send without communication. If you have any problem with the item or the order, pls feel free to contact me, we will reply you asap after we read it.

It's just take you 1 minute. 20 years of Research & Development and manufacturing experience makes us more professional on quality control, user experience and after-sale services. Electronics, Home/Garden, Agriculture/Farming, Back-up Power, Camping/Hiking, Recreational Vehicle (RV). Lightweight, Indicator light, Corrosion resistant, Portable. Abrasion Resistant, Acid Resistant, Corrosion Resistant, Dustproof, Heat Resistant, Moisture Resistant, Scratch Resistant, Shockproof, Tear Resistant, Waterproof.